中圖網小程序
一鍵登錄
更方便
本類五星書更多>
-
>
公路車寶典(ZINN的公路車維修與保養秘籍)
-
>
晶體管電路設計(下)
-
>
基于個性化設計策略的智能交通系統關鍵技術
-
>
花樣百出:貴州少數民族圖案填色
-
>
山東教育出版社有限公司技術轉移與技術創新歷史叢書中國高等技術教育的蘇化(1949—1961)以北京地區為中心
-
>
鐵路機車概要.交流傳動內燃.電力機車
-
>
利維坦的道德困境:早期現代政治哲學的問題與脈絡
射頻電路設計(第二版)(英文版) 版權信息
- ISBN：9787121072727
- 條形碼：9787121072727 ; 978-7-121-07272-7
- 裝幀：暫無
- 冊數：暫無
- 重量：暫無
- 所屬分類：>>
射頻電路設計(第二版)(英文版) 內容簡介
本書**版寫于1982年并多次重印，是一本經典的射頻電路書籍。新版加強了無線技術方面的闡述，新增了關于射頻前端設計與射頻設計工具的兩章內容，還包含了集成電路和系統級設計方面的內容。全書內容包括電路元件、諧振電路、濾波器設計、阻抗匹配、射頻晶體管、小信號射頻放大器設計、射頻（大信號）功率放大器設計、射頻前端電路設計和射頻軟件工具等。該書內容精煉，深入淺出，書中包括許多詳細的設計實例，非常適合有一定電路基礎的初學者作為實踐指南。
本書適合射頻與微波技術工程師、無線通信工程技術人員和通信網技術人員閱讀，也可供相關科研工作者及工程技術人員參考。
射頻電路設計(第二版)(英文版) 目錄
Chapter 1 Components and Systems
1.1 WIRE
1.1.1 Skin Effect
1.1.2 Straight-Wire Inductors
1.2 RESISTORS
1.2.1 Resistor Equivalent Circuit
1.3 CAPACITORS
1.3.1 Parallel-Plate Capacitor
1.3.2 Real-World Capacitors
1.3.3 Capacitor Types
1.4 INDUCTORS
1.4.1 Real-World Inductors
1.4.2 Single-Layer Air-Core Inductor Design
1.4.3 Magnetic-Core Materials
1.5 TOROIDS
1.5.1 Core Characteristics
1.5.2 Powdered Iron vs. Ferrite
1.6 TOROIDAL INDUCTOR DESIGN
1.7 PRACTICAL WINDING HINTS
Chapter 2 Resonant Circuits
2.1 SOME DEFINITIONS
2.2 RESONANCE (LOSSLESS COMPONENTS)
2.3 LOADED Q
2.3.1 Effect of RL and RL on the Loaded Q
2.3.2 The Effect of Component Q on Loaded Q
2.4 INSERTION LOSS
2.5 IMPEDANCE TRANSFORMATION
2.6 COUPLING OF RESONANT CIRCUITS
2.6.1 Capacitive Coupling
2.6.2 Inductive Coupling
2.6.3 Active Coupling
2.7 SUMMARY
Chapter 3 Filter Design
3.1 BACKGROUND
3.2 MODERN FILTER DESIGN
3.3 NORMALIZATION AND THE LOW-PASS PROTOTYPE
3.4 FILTER TYPES
3.4.1 The Butterworth Response
3.4.2 The Chebyshev Response
3.4.3 The Bessel Filter
3.5 FREQUENCY AND IMPEDANCE SCALING
3.6 HIGH-PASS FILTER DESIGN
3.7 THE DUAL NETWORK .
3.8 BANDPASS FILTER DESIGN
3.9 SUMMARY OF THE BANDPASS FILTER DESIGN PROCEDURE
3.10 BAND-REJECTION FILTER DESIGN
3.11 THE EFFECTS OF FINITE Q
Chapter 4 Impedance Matching
4.1 BACKGROUND
4.2 THE L NETWORK
4.3 DEALING WITH COMPLEX LOADS
4.4 THREE-ELEMENT MATCHING
4.4.1 The Pi Network
4.4.2 The T network
4.5 LOW-Q OR WIDEBAND MATCHING NETWORKS
4.6 THE SMITH CHART
4.6.1 Smith Chart Construction
4.6.2 Basic Smith Chart Tips
4.6.3 Plotting Impedance Values
4.6.4 Impedance Manipulation on the Chart
4.6.5 Conversion of Impedance to Admittance
4.6.6 Admittance Manipulation on the Chart
4.7 IMPEDANCE MATCHING ON THE SMITH CHART .
4.7.1 Two-Element Matching
4.7.2 Three-Element Matching
4.7.3 Multi-Element Matching
4.8 SOFTWARE DESIGN TOOLS
4.8.1 Smith Chart Tools
4.8.2 Integrated Design Tools
4.9 SUMMARY
Chapter 5 The Transistor at Radio Frequencies
Chapter 6 Small-Signal RF Amplifier Design
Chapter 7 RF(Large Signal)Power Amplifiers
Chapter 8 RF Front-End Desing
Chapter 9 RF Design Tools
Appendix A RF and Antennas
Appendix B Vector Algebra
Bibliography
1.1 WIRE
1.1.1 Skin Effect
1.1.2 Straight-Wire Inductors
1.2 RESISTORS
1.2.1 Resistor Equivalent Circuit
1.3 CAPACITORS
1.3.1 Parallel-Plate Capacitor
1.3.2 Real-World Capacitors
1.3.3 Capacitor Types
1.4 INDUCTORS
1.4.1 Real-World Inductors
1.4.2 Single-Layer Air-Core Inductor Design
1.4.3 Magnetic-Core Materials
1.5 TOROIDS
1.5.1 Core Characteristics
1.5.2 Powdered Iron vs. Ferrite
1.6 TOROIDAL INDUCTOR DESIGN
1.7 PRACTICAL WINDING HINTS
Chapter 2 Resonant Circuits
2.1 SOME DEFINITIONS
2.2 RESONANCE (LOSSLESS COMPONENTS)
2.3 LOADED Q
2.3.1 Effect of RL and RL on the Loaded Q
2.3.2 The Effect of Component Q on Loaded Q
2.4 INSERTION LOSS
2.5 IMPEDANCE TRANSFORMATION
2.6 COUPLING OF RESONANT CIRCUITS
2.6.1 Capacitive Coupling
2.6.2 Inductive Coupling
2.6.3 Active Coupling
2.7 SUMMARY
Chapter 3 Filter Design
3.1 BACKGROUND
3.2 MODERN FILTER DESIGN
3.3 NORMALIZATION AND THE LOW-PASS PROTOTYPE
3.4 FILTER TYPES
3.4.1 The Butterworth Response
3.4.2 The Chebyshev Response
3.4.3 The Bessel Filter
3.5 FREQUENCY AND IMPEDANCE SCALING
3.6 HIGH-PASS FILTER DESIGN
3.7 THE DUAL NETWORK .
3.8 BANDPASS FILTER DESIGN
3.9 SUMMARY OF THE BANDPASS FILTER DESIGN PROCEDURE
3.10 BAND-REJECTION FILTER DESIGN
3.11 THE EFFECTS OF FINITE Q
Chapter 4 Impedance Matching
4.1 BACKGROUND
4.2 THE L NETWORK
4.3 DEALING WITH COMPLEX LOADS
4.4 THREE-ELEMENT MATCHING
4.4.1 The Pi Network
4.4.2 The T network
4.5 LOW-Q OR WIDEBAND MATCHING NETWORKS
4.6 THE SMITH CHART
4.6.1 Smith Chart Construction
4.6.2 Basic Smith Chart Tips
4.6.3 Plotting Impedance Values
4.6.4 Impedance Manipulation on the Chart
4.6.5 Conversion of Impedance to Admittance
4.6.6 Admittance Manipulation on the Chart
4.7 IMPEDANCE MATCHING ON THE SMITH CHART .
4.7.1 Two-Element Matching
4.7.2 Three-Element Matching
4.7.3 Multi-Element Matching
4.8 SOFTWARE DESIGN TOOLS
4.8.1 Smith Chart Tools
4.8.2 Integrated Design Tools
4.9 SUMMARY
Chapter 5 The Transistor at Radio Frequencies
Chapter 6 Small-Signal RF Amplifier Design
Chapter 7 RF(Large Signal)Power Amplifiers
Chapter 8 RF Front-End Desing
Chapter 9 RF Design Tools
Appendix A RF and Antennas
Appendix B Vector Algebra
Bibliography
展開全部
書友推薦
- >
自卑與超越
- >
二體千字文
- >
名家帶你讀魯迅:故事新編
- >
人文閱讀與收藏·良友文學叢書:一天的工作
- >
詩經-先民的歌唱
- >
新文學天穹兩巨星--魯迅與胡適/紅燭學術叢書(紅燭學術叢書)
- >
小考拉的故事-套裝共3冊
- >
唐代進士錄
本類暢銷
