掃一掃
關注中圖網
官方微博
本類五星書更多>
-
>
魯迅全傳：苦魂三部曲-增訂版(全三冊)
-
>
大家精要- 克爾凱郭爾
-
>
尼 采
-
>
弗洛姆
-
>
大家精要- 羅素
-
>
大家精要- 錢穆
-
>
白居易:相逢何必曾相識
柳百成院士文集(精)/中國工程院院士文集 版權信息
- ISBN：9787111704935
- 條形碼：9787111704935 ; 978-7-111-70493-5
- 裝幀：一般膠版紙
- 冊數：暫無
- 重量：暫無
- 所屬分類：>
柳百成院士文集(精)/中國工程院院士文集 本書特色
展示柳百成院士學術成果與愛國奉獻、創新思維、頑強拼搏、健康體魄、熱愛生活的學術人生
柳百成院士文集(精)/中國工程院院士文集 內容簡介
《柳百成院士文集》收錄了柳百成院士近年來的學術成果、國家制造業戰略研究成果、代表性學術報告等各類學術類文章，以及個人專訪文章、學生回憶類文章等。 全書共分6篇，第1篇為“鑄造及凝固過程建模與仿真”代表性學術論文，第2篇為學術會議報告，第3篇為制造業發展及制造強國戰略研究論文，第4篇為制造業發展及制造強國戰略研究會議報告，第5篇為留學情結與學術人生相關的專訪類文章，第6篇為祝賀與回憶類文章。 文集在展示柳百成院士近年來學術成果的同時，還展現了學術之外的內容，讓讀者可以更全面地認識柳百成院士。
柳百成院士文集(精)/中國工程院院士文集 目錄
目錄
自序
前言
出版說明
第1篇“鑄造及凝固過程建模與仿真”代表性學術論文
綜述論文2
1. 3D Modeling and Simulation of Dendritic Growth during Solidification3
2.鑄造過程的多尺度模擬研究進展10
3. Phase-field simulation of solidification in multicomponent alloys coupled with thermodynamic
and diffusion mobility databases22
4. Advances in Multi-scale Modeling of Solidification and Casting Processes28
5.汽車工業鎂合金壓鑄成形技術及模擬仿真38
6. Simulation and experimental validation of three-dimensional dendrite growth50
航空及重燃葉片建模與仿真57
7. MODELING OF DIRECTIONAL SOLIDIFICATION PROCESS OF SUPERALLOY
TURBINE BLADE CASTINGS58
8. Numerical Simulation of Solidification Process on Single Crystal Ni-Based Superalloy
Investment Castings65
9.Modeling of Grain Selection during Directional Solidification of Single Crystal Superalloy
Turbine Blade Castings75
10. NUMERICAL SIMULATION OF TEMPERATURE FIELD IN DIRECTIONAL SOLIDIFICATION
OF TURBINE BLADE BY LIQUID METAL COOLING METHOD81
11. Multiscale Modeling and Simulation of Directional Solidification Process of Turbine Blade
Casting with MCA Method87
12. Numerical Simulation and Optimization of Directional Solidification Process of Single
Crystal Superalloy Casting95
13. Deformation and recrystallization of single crystal nickel-based superalloys during investment
casting106
14. Numerical simulation of dendrite growth in nickel-based superalloy and validated by in-situ
observation using high temperature confocal laser scanning microscopy123
15. A model for simulation of recrystallization microstructure in single-crystal superalloy140
輕量化材料工藝建模與仿真149
16. Preliminary Study on Simulation of Microporosity Evolution and Fatigue Life of Aluminum
Alloy Casting 150
17. Processing Technology and Mechanical Properties of Die-Cast Magnesium Alloy AZ91D156
18. Influences of Casting Pressure Conditions on the Quality and Properties of a Magnesium
Cylinder Head Cover Die Casting161
19. Numerical Modeling of Microstructure Evolution and Dendrite Growth for Al-Si Alloy Casting
during Low Pressure Die Casting 168
20. Dendrite growth modelling of cast magnesium alloy174
21. Simulation of Magnesium Alloy AZ91D Microstructure Using Modified Cellular Automaton
Method179
22. Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary
aluminum alloys185
23. A phase field model for simulating the precipitation of multi-variant β-Mg17Al12 in
Mg-Al-based alloys200
大型鑄件及鋼錠建模與仿真206
24. Instability of Fluid Flow and Level Fluctuation in Continuous Thin Slab Casting Mould207
25. A Coupled Electrical-Thermal-Mechanical Modeling of Gleeble Tensile Tests for
Ultra-High-Strength (UHS) Steel at a High Temperature214
26. Cellular Automaton Modeling of Austenite Nucleation and Growth in Hypoeutectoid Steel during
Heating Process231
27. Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting Process
with Consideration of Martensitic Transformation242
28. Modeling of Species Transport and Macrosegregation in Heavy Steel Ingots255
29. Experimental Measurements for Numerical Simulation of Macrosegregation in a 36-Ton
Steel Ingot264
30. Three-Dimensional Simulation of Macrosegregation in a 36-Ton Steel Ingot Using a
Multicomponent Multiphase Model275
31.Analysis of internal crack in a six-ton P91 ingot286
第2篇學術會議報告
國際會議298
1. Experience on Modeling of Casting and Solidification Processes
(鑄造及凝固過程建模研究經驗)299
2. Progress on Multi-scale Modeling of Solidification Process of Advanced Casting Technology
(先進鑄造技術凝固過程的多尺度建模研究進展)304
3. Numerical Simulation of Macrosegregation in Large Steel Ingot with Multicomponent and
Multiphase Model(基于多成分和多相模型對大型鋼錠中宏觀偏析進行數值模擬研究)314
4. Multiscale Modeling and Simulation of Directional Solidification Process of Ni-based Superalloy
Turbine Blade Casting(鎳基高溫合金渦輪葉片鑄件定向凝固過程的多尺度建模與仿真研究)319
國內會議324
5.建模與仿真在裝備制造中的作用與前景
展開全部
書友推薦
- >
名家帶你讀魯迅:故事新編
- >
我從未如此眷戀人間
- >
煙與鏡
- >
有舍有得是人生
- >
伊索寓言-世界文學名著典藏-全譯本
- >
朝聞道
- >
莉莉和章魚
- >
我與地壇
本類暢銷
