掃一掃
關注中圖網
官方微博
本類五星書更多>
-
>
公路車寶典(ZINN的公路車維修與保養秘籍)
-
>
晶體管電路設計(下)
-
>
基于個性化設計策略的智能交通系統關鍵技術
-
>
花樣百出:貴州少數民族圖案填色
-
>
山東教育出版社有限公司技術轉移與技術創新歷史叢書中國高等技術教育的蘇化(1949—1961)以北京地區為中心
-
>
鐵路機車概要.交流傳動內燃.電力機車
-
>
利維坦的道德困境:早期現代政治哲學的問題與脈絡
浮選攪拌調漿過程特征與機理:英文 版權信息
- ISBN：9787564630560
- 條形碼：9787564630560 ; 978-7-5646-3056-0
- 裝幀：一般膠版紙
- 冊數：暫無
- 重量：暫無
- 所屬分類：>
浮選攪拌調漿過程特征與機理:英文 內容簡介
Aiming at the problem that there are only few reports on related basic theory research of stirred pulp-mixing in flotation， this book describes and evaluates the stirred pulp mixing process and its effect from several different angles： summarize parameters that are used to evaluate power consumption and mixing time， conclude characteristic parameters that represent circulation and shear properties， and come up with the corresponding evaluation standard for mixing efficiency; according to the distribution regularity of material in tank under different stirring mechanisms， parameters and concepts such as cumulative concentration variance， interval concentration variance， just-suspended capability， poor mixing zone and effective range， etc. are summarized to represent the suspension performance of material; use Computational Fluid Dynamics software-FLUENT to correspond to and evaluate typical flow field characteristics， and deepen the research on the function characteristic and regularity of flow field; combining with theoretical discussion in aspects such as flow field characteristic， mixing process， interaction between particles， dispersion of reagents， evaluation parameters of mixing performance of stirring mechanism and solid-liquid mass transfer in agitated tank， and so on， this hook lays a theoretical foundation for realizing cognition and control of practical pulp-mixing process.
浮選攪拌調漿過程特征與機理:英文 目錄
Chapter 1 Origin and occurrence
1．1 Demand of flotation machine system to efficient stirred pulp-mixing
1．2 Demand of flotation column on efficient pulp-mixing
1．3 Demand of fine particle mineral separation on efficient pulp-mixing
1．4 Demand of compact process on efficient pulp-mixing
Chapter 2 Function and application status of flotation pulp-mixing
2．1 Basic functions and realization ways of pulp-mixing
2．2 Industrialization and application of current pulp-mixing technology
2．3 Difficulties and challenges of fine particle pulp-mixing
Chapter 3 Equipment configuration characteristics and R & D dynamics of stirred pulp-mixing
3．1 Basic configuration of pulp-mixing agitated tank in flotation unit
3．2 Contrast analysis of the stirring equipment of flotation unit
3．3 R & D of agitated tank process characteristics
3．4 The proposal of R & D of stirred pulp-mixing process
Chapter 4 Mixing characteristics of stirred pulp-mixing process
4．1 Overview of test research on stirring characteristic
4．2 Basic flow field types under the effect of stirring mechanism
4．3 Mixing characteristic parameters of the stirring process
4．4 Mixing efficiency analysis of the stirring process
4．5 General comments on the mixing performance of conventional stirred pulp-mixing process
Chapter 5 Solid-liquid suspension characteristics of the stirred pulp-mixing process
5．1 Experimental design of the research on solid-liquid suspension characteristics
5．2 Material distribution characteristic under different stirring mechanism．．．
5．3 Evaluation of the stirring system suspension capability
5．4 Regularity of the function of interval concentration variance
5．5 Analysis of suspension capability of stirring system
5．6 General evaluation of material suspension capability of conventional stirred pulp-mixing process
Chapter 6 Numerical simulation of stirred pulp-mixing process
6．1 Computational fluid dynamics （CFD） and simulation software introduction
6．2 Fundamental governing equations and turbulence model
6．3 Numerical computation
6．4 Simulation of axial flow field
6．5 Simulation of radial flow field
6．6 Simulation of flow field added with draft-tube
6．7 Simulation of flow field added with baffles
6．8 Analysis of influence factors of flow field characteristics in agitated tank
6．9 Comprehensive evaluation of numerical simulation of stirring flow field characteristics
Chapter 7 Stirred pulp-mixing process mechanism
7．1 Flow field characteristics in agitated tank
7．2 Mixing process in agitated tank
7．3 The interaction process among mineral particles
7．4 Diffusion process of flotation reagents
7．5 Theoretical derivation of mixing performance evaluation parameters
7．6 Mass transfer between solid-liquid phases
Chapter 8 Future research and development of pulp-mixing process intensification
8．1 Efficient pulp-mixing based on process intensification
8．2 High efficiency characteristic of stirred pulp-mixing
8．3 Similarity scale-up problem of efficient pulp-mixing equipments
References
1．1 Demand of flotation machine system to efficient stirred pulp-mixing
1．2 Demand of flotation column on efficient pulp-mixing
1．3 Demand of fine particle mineral separation on efficient pulp-mixing
1．4 Demand of compact process on efficient pulp-mixing
Chapter 2 Function and application status of flotation pulp-mixing
2．1 Basic functions and realization ways of pulp-mixing
2．2 Industrialization and application of current pulp-mixing technology
2．3 Difficulties and challenges of fine particle pulp-mixing
Chapter 3 Equipment configuration characteristics and R & D dynamics of stirred pulp-mixing
3．1 Basic configuration of pulp-mixing agitated tank in flotation unit
3．2 Contrast analysis of the stirring equipment of flotation unit
3．3 R & D of agitated tank process characteristics
3．4 The proposal of R & D of stirred pulp-mixing process
Chapter 4 Mixing characteristics of stirred pulp-mixing process
4．1 Overview of test research on stirring characteristic
4．2 Basic flow field types under the effect of stirring mechanism
4．3 Mixing characteristic parameters of the stirring process
4．4 Mixing efficiency analysis of the stirring process
4．5 General comments on the mixing performance of conventional stirred pulp-mixing process
Chapter 5 Solid-liquid suspension characteristics of the stirred pulp-mixing process
5．1 Experimental design of the research on solid-liquid suspension characteristics
5．2 Material distribution characteristic under different stirring mechanism．．．
5．3 Evaluation of the stirring system suspension capability
5．4 Regularity of the function of interval concentration variance
5．5 Analysis of suspension capability of stirring system
5．6 General evaluation of material suspension capability of conventional stirred pulp-mixing process
Chapter 6 Numerical simulation of stirred pulp-mixing process
6．1 Computational fluid dynamics （CFD） and simulation software introduction
6．2 Fundamental governing equations and turbulence model
6．3 Numerical computation
6．4 Simulation of axial flow field
6．5 Simulation of radial flow field
6．6 Simulation of flow field added with draft-tube
6．7 Simulation of flow field added with baffles
6．8 Analysis of influence factors of flow field characteristics in agitated tank
6．9 Comprehensive evaluation of numerical simulation of stirring flow field characteristics
Chapter 7 Stirred pulp-mixing process mechanism
7．1 Flow field characteristics in agitated tank
7．2 Mixing process in agitated tank
7．3 The interaction process among mineral particles
7．4 Diffusion process of flotation reagents
7．5 Theoretical derivation of mixing performance evaluation parameters
7．6 Mass transfer between solid-liquid phases
Chapter 8 Future research and development of pulp-mixing process intensification
8．1 Efficient pulp-mixing based on process intensification
8．2 High efficiency characteristic of stirred pulp-mixing
8．3 Similarity scale-up problem of efficient pulp-mixing equipments
References
展開全部
浮選攪拌調漿過程特征與機理:英文 作者簡介
李振 was born in China in April 1983. He joined the Communist Party of China in December 2003. He is a doctor （post-doctor）, an associate professor and a master's supervisor, and his research covers a wide range of areas from the theory to the process and equipment of mineral processing, and mainly focuses on theoretical research and technology development related to pulp pretreatment, froth flotation, ultrafine grinding fine grading, and comprehensive utilization of mineral resources. He is now the dean of Mineral Processing Department of Xi'an University of Science and Technology, and he is also entitled with the young core instructor of provincial predominant discipline of Mineral Processing Engineering. His public positions also include the backbone and visiting researcher in Key Laboratory of Coal Resources Exploration and Comprehensive Utilization, Ministry of Land and Resources. He currently chairs many high-level research projects （including projects that have been completed）, which include one national level project （National Natural Science Foundation of China）, two provincial and ministerial level projects （one project is the Specialized Research Fund for the Doctoral Program of Higher Education of China and the other is Natural Science Basic Research Plan in Shaanxi Province of China）, four provincial departmental level projects （two Scientific Research Programs Funded by Shaanxi Provincial Education Department, one open project of Key Laboratory of Coal Resources Exploration and Comprehensive Utilization, Ministry of Land and Resources, one open fund of Key Laboratory of Coal Processing and Efficient Utilization of Ministry of Education）, three projects based on the subproject of 973 Program, and several science innovation projects based on university-enterprise cooperation. In addition, he serves as the director in many projects related to the discipline construction and talents cultivation. He has published more than thirty papers as the first author, published three academic monographs, obtained thirteen patents as the first inventor and edited four planned textbooks. He won two science and technology awards of provincial and ministerial level, and three science and technology awards and two teaching achievement awards of bureau level. He was awarded the Chinese Government Scholarship to sponsor his study abroad through the "Special Project of Talent Cultivation in the Western Region of China" in 2014, and has been at University of Alberta in Canada as a visiting professor in 2015-2016.
書友推薦
- >
我與地壇
- >
人文閱讀與收藏·良友文學叢書:一天的工作
- >
詩經-先民的歌唱
- >
【精裝繪本】畫給孩子的中國神話
- >
自卑與超越
- >
企鵝口袋書系列·偉大的思想20:論自然選擇(英漢雙語)
- >
新文學天穹兩巨星--魯迅與胡適/紅燭學術叢書(紅燭學術叢書)
- >
龍榆生：詞曲概論/大家小書
本類暢銷
